Fenders

In Edwardian times the fenders would commonly sit over a hearth flush with the floor and cover the gap between it and the floorboards.

Edwardian style fender

Our Edwardian style fenders are made from 6"x3" tiles with 3"x3" inch corners. A hearth can be incorporated in the middle if required

These fenders can be made to any size in any of our standard tile colours.

An example fender of 48 iches x 13inches is £175

We can also make fenders from 4x4 inch tiles to any size

Edwardian style fender

We also use the canted corner C20 kerbed tiles.

All the fenders can be supplied as seperate items or built into the hearths themselves.

Edwardian style fender

Individual Hearth Tiles Individual Hearth Tiles are available in various finishes and shapes.

Our Standard Sizes

A Standard Size Hearth is 54" x 15" x2" thick with or without a kick (a tongue extending back) but all other sizes are available.

What Hearth Shapes are Available?

The standard hearth shape is rectangular (a flat back hearth). These flat back hearths are for use when the fireplace opening is level or just in front of the wall line (the front of the chimney breast).

Kicks

Kicks or tongues accomodate fireplaces where the fireplace opening steps back behing the wall line of the chimney breast.

Cut Outs

A cut out is required when the fireplace system is fixed in the floor and is forward of the wall line e.g. Baxi Burnall and similar systems.

Back Hearths

if you have a large open fireplace or "Inglenook Fireplace" we can supply a separate Back Hearth with our stone hearths or incorporate it into a one piece tiled hearth as long as the size is reasonable.

Fireplace Hearth Sizes

There are strict regulations governing the size of a fireplace hearth.

For a Gas Fire the Hearth must be 15" in front of the flame and 2" thick.

For Solid Fuel Fires the Hearth can be flush with the floor and less than 15" deep provided there is a fixed fender, otherwise it must be 15" in front of the fire.

For a Solid Fuel Stove the Hearth must be at least 12" in front of the opening door of the stove.

Once the regulations are complied with the size and shape of your hearth is down to aesthetics.

If you have exposed floorboards then the hearth should fully cover the constructional hearth to avoid seeing the concrete. If your fireplace has a mantel then the hearth size will vary depending on whether the mantel stands on the hearth or the hearth sits between the mantel legs